English
русский
Español-
09 / 11
Mandrel Bent Tube: How the Process Works, When It's Required, and Machine Setup
If a bend on your drawing calls for a radius tighter than about twice the tube's outside diameter, or the wall is thin relative to the diameter, an unsupported bend will almost always fail inspection... -
09 / 04
How Does Variable Radius Tube Bending Work with CNC Multi-Radius and Roll Bending Machines?
Variable radius tube bending is not a single machine process. In practice, it is usually achieved by combining a CNC draw bender with a roll bender, or by selecting a machine that can change the bend... -
09 / 04
How Do You Calculate Bend Radius Using Formulas, Material Limits, and Tooling Rules?
A bend radius that works is one that fits three constraints at once: the material's minimum bend radius, the tooling's available radius, and the assembly's dimensional requirement. The shop floor pro... -
08 / 28
Hydraulic Press Bending Machine Guide: How to Choose Right Press Bender for Metal Tubes
To produce moderate-volume, simple-geometry bends in metal tube with consistent angles and low tooling cost, a hydraulic press bending machine is often a cost-effective solution your shop can choose.... -
08 / 21
Hydraulic Tube Punching Machine: How It Works and Where It Fits
What a Hydraulic Tube Punching Machine Actually Does A hydraulic tube punching machine uses a hydraulic cylinder to drive a punch through the wall of a metal tube or pipe, creating clean, consistent ... -
08 / 14
What are the working principles and application areas of industrial riveting machines?
What An Industrial Riveting Machine Does An industrial riveting machine forms a mechanical joint by deforming the shank or head of a rivet under controlled force, permanently locking two or more laye... -
08 / 07
Why CNC Tube Bending Machines Matter for Lightweight Chassis Design?
CNC Tube Bending Technology Is a Core Enabler of Lightweight Chassis Design CNC tube bending machines make lightweight chassis manufacturing possible by shaping thin-wall, high-strength tubing into p... -
07 / 31
Why Choosing the NC Semi-Automatic Single Head Tube Bending Machine Matter?
Programmable Bend Control Reduces Setup Variance Between Operators An NC semi-automatic single head tube bending machine stores bend angle, rotation, and feed length as programmed values rather than ... -
07 / 24
how to cut aluminium tube
The Cleanest Way to Cut Aluminium Tube Is With a Rotary Tube Cutter or Cold Saw For a square, burr-free cut with minimal deformation, a rotary tube cutter or a cold saw fitted with a fine-tooth carbi... -
07 / 16
Intelligent Single-Head Tube End Forming Technology: A Precision Manufacturing Tool for Lightweighting New Energy Vehicles
The rapid growth of the new energy vehicle industry has placed unprecedented pressure on manufacturers to develop components that are simultaneously lighter, stronger, and more precisely engineered t... -
07 / 09
How do intelligent single-head tube end forming machines facilitate lightweighting in new energy vehicles?
The rise of new energy vehicles has reshaped manufacturing priorities across the automotive supply chain, and few technologies capture this shift as clearly as the smart single head tube end forming ... -
07 / 02
How Can High-Precision Pneumatic Tube Cutting Accelerate the Global Revolution of NEV Lightweighting and Manufacturing Efficiency?
The shift toward new energy vehicles has fundamentally changed how automotive engineers think about weight, structural design, and manufacturing precision. Every kilogram removed from a vehicle cont...
Copyright © 2025 Huashun Technology All Rights Reserved.
Custom Precision Tube Forming Machine Manufacturers