Induction Heating Pipe Bending Machine
|Categories||Induction Heating Pipe Bending Machine|
|Product Name||Induction Pipe Bending Machine|
|Processing Method||Induction Heating|
|Processing Material||Metal Pipes|
Induction heating pipe bending machine uses intermediate frequency induction heating to bend the workpiece under the condition of local heating. Compared with the general cold pipe bending machine, it not only does not need a complete set of special mold, and the volume of the machine only accounts for the same specification of cold pipe bending machine 1/3 ~ 1/2.
The process of intermediate frequency bending is to cover the bending part of the steel tube with an induction ring, use a mechanical rotary arm to catch the pipe head, and pass a high-density if current into the induction ring to heat the steel tube. When the temperature of the steel tube rises to the plastic state, the steel tube is pushed forward by mechanical thrust at the back end of the steel tube for bending. Simple process flow: namely side heating, side pushing, side bending, side cooling, finish bending control.
- How to repair and use the cold rolling mill after failureThe current roller mill cleaning device, and can prevent the deterioration caused by iron work environment, in different areas of the production process, due to the bad environment in the process of cold rolling mill run,2022-01-04
- Grasp the vibration characteristics of hot rolling millTo test the processing factory abnormal vibration of hot rolling mill, according to the controller vibration data measured on site and mill finite element grab,2021-12-31