Induction Pipe Bending Machine
|Categories||Induction Heating Pipe Bending Machine|
|Product Name||Induction Pipe Bending Machine|
|Bending Method||Induction Heat|
|Usage||Large Diameter Pipe Bending|
The straight pipe or section is placed in the machine bed by guiding it through three coils that match the shape of the profile and by gripping one end of the profile in the bending arm. The bending arm of induction heating pipe bending machine is set to the required radius.
Once the profile is in position the copper heating coil heats up to the required temperature (up to 1,100ºC) and creates a circumferential heated zone. The two adjacent coils with nozzles are cooling the profile by blowing cold air and spraying water on the surface. As the heating coil reaches the required temperature, the profile is gently pushed through the coils. The swing arm moves along with the profile and bends it in the required radius and shapes it into a bend.
- How to repair and use the cold rolling mill after failureThe current roller mill cleaning device, and can prevent the deterioration caused by iron work environment, in different areas of the production process, due to the bad environment in the process of cold rolling mill run,2022-01-04
- Grasp the vibration characteristics of hot rolling millTo test the processing factory abnormal vibration of hot rolling mill, according to the controller vibration data measured on site and mill finite element grab,2021-12-31