Solutions for Multi Bending Pipe and Tube Fabrication
Home / all / Industry News /

Analysis of the annual output and technical parameters of the 630 ton aluminum profile extrusion press machine plant line

Analysis of the annual output and technical parameters of the 630 ton aluminum profile extrusion press machine plant line

Issue Time:2022/07/04
The daily output of the aluminum profile extrusion press machine plant line, the annual output value, the production efficiency, how the output is calculated, and the technical parameters of the 630-ton aluminum profile extrusion press machine plant line, we will help you answer them one by one in our article.
The annual output of aluminum extrusion press is based on:
1. The output of the aluminum profile extrusion press machine plant line is different depending on the use of the die.
2. The wall thickness of the raw aluminum profile also affects the output, and the thicker it is, the easier it is to discharge.
3. The material of the raw material of the aluminum profile, the bar of different materials, and the amount of output are also related to the output.
4. The use of 6063 bars is better for extrusion, and the output is also high.
Summary: So the output is related to the mold and raw materials. Generally, the aluminum profile extrusion press machine plant line equipment runs 24 hours a day, 5 tons for 630t, 6 to 7 tons for 800t, and 8 tons for 1000t.
630 tons of aluminum extrusion press technical parameters:
1. Working pressure of hydraulic system: 21Mpa, maximum extrusion force: P=630T
2. Rated power: 85KW
3. Specifications of aluminum rods: length less than or equal to 450mm, diameter less than or equal to 90mm
4. Total weight of 630T aluminum profile extrusion press machine plant line: about 25T
Our company reminds: "The specific aluminum profile extrusion press machine plant line knowledge still depends on the actual situation."
FOLLOW US:
NEWSLETTER SIGNUP:
SEND INQUIRY
Name:
Business Agency Cooperation
Tel:
86-512-58288488
whatsapp:
+8618112758839
+8619941929092
skype:
hbboynic
Address:
Donglai Industrial Park, Nanfeng Town, Zhangjiagang City, Jiangsu, China.
NEWS CENTER
  • What if the elbow of the pipe bender is off?
    The whole process of CNC lathe cutting machine with error control is actually carried out by pulse signal, and the whole process of replacing the slash with a straight line in the middle of two points. The bending of the pipe bending machine is about 900 points a week.
    2022/11/25
  • How does the pipe bending machine reduce wear?
    In the southern city, although winter is not cold, but its cold is more biting, cold words will last a long time.
    2022/11/24