China pipe bending machine is suitable for the bending of pipes of various materials; the bending is fast, without burrs, and the bending opening is perpendicular to the axis of the pipe; the gripper made of stainless steel forms a self-centering clamping system suitable for a wide range of pipe diameters; The bending blade of the pipe bender is close to the clamping system, so that the pipe vibration can be avoided, even if the thin-walled pipe or the small-diameter pipe is bent to ensure no deformation.
The pipe bender machine is compact, light and easy to carry, suitable for on-site installation or in the workshop; simple and fast to set up; optional pneumatic or electric bending motor; use the pipe bender to pay attention to several key points. It is necessary to change the spindle speed after parking. The gears must be fully meshed when shifting. When the machine tool is found to be abnormal, it should be parked and checked immediately.
Before bending, adjust the tool and clamp the workpiece. The length of the clamping part shall not be less than 50 mm. The parking baffle should be fixed, and work can only be carried out after the sequence of clamping, unclamping, forward and backward testing. When the machine tool is rolling, no part of the human body shall touch the transmission parts. When operating, tie up the cuffs and prohibit working with gloves. The human head should deviate from the direction of bending.
It is necessary to park when changing tools, measuring workpieces, smoothing, and finishing pipe heads. When bending the pipe head, avoid the pipe head flying out and hurting people. When the long material pipe is put into the material rack and the bundled lead wire is loosened, measures should be taken to avoid the pipe rolling, impact and crushing. When using the grinding wheel pipe bender, check whether the grinding wheel is damaged, cracked, damp, and the power cord is secure.